MSC 4000 Side Mount - Elect, Non-Power Trim
The remainder of controls 8M0178526, 8M0178528, 8M0178535 can be mounted starboard or port side and are stackable. They offer "push to choke" ignition switch, 8 pin connector wiring harness, lanyard stop switch, separate neutral warm-up lever and requires Gen I throttle and shift cables. All controls have a 5 pin accessory plug for tachometer and an adjustable throttle friction. These controls are not for use with engines that have counter rotating lower units. Older engines may require an adapter harness
SIDE MOUNT REMOTE CONTROL
8M0178535 - This control features a non - trim handle and a 15 ft. (4.58 M) harness with amp connector and will direct connect to the engine models below without the use of an adapter harness. For MY2005 and newer, 8/9.9, 15/20 HP FourStroke Outboards with electric start and non-trim. For MY2005 and newer 8/9.9 FourStroke Outboards SAE T/S cables must be used. For 8/9.9 FourStroke engines generation change above S/N OR192772 and 15/20 FourStroke engines will use GEN I cables. GEN I cables must be used on other engines
Guide page: 435
GTIN: 745061612723
WEIGHT: 4.554 kg
Note: Always verify the compatibility of replacement parts with your specific engine model and serial number. For assistance, consult your Mercury Marine dealer or refer to the Mercury Parts Catalog.