🚚 Free Regular Shipping on orders over $200 (up to 4kg)
Exhaust Riser Kits (Gas, Wet Joint, 2002 & Older)
Raises the height of the engines exhaust system to prevent water from entering the engine through the exhaust system. Maximum height of 9 in.(228 mm). Two different types of exhaust elbows have been used (cast iron and stainless steel). To tell which one you have, look at the elbows mounting bolts. Cast iron elbows use 4 long bolts. Stainless steel elbows use four short 1 in.(25 mm) long bolts. For MCM/MIE 8.1L engines see "Exhaust Elbow/Riser Kits (8.1L) Non-Emissions Ctrl" section.
INTERMEDIATE ELBOW KIT
14801A 1 - Only required on sterndrive engines that have the exhaust going through the prop. Fits MCM V-8 (305, 350 & 377 cid) engines (0W309999 and below)
Exhaust Riser Kits (Gas, Dry Joint, Small Block, Non-EC, 2002 & Newer)
Raises the height of the GM V-6 & V-8 small block (non-EC) engines with dry joint exhaust system to prevent water from entering the engine through the exhaust system. Maximum height of 6 in. (152 mm). For MCM/MIE 8.1L & 8.2L (non-EC) engines see "Exhaust Elbow/Riser Kits (8.1L & 8.2L) Non-Emissions Ctrl" section. For EC engines, see the Emissions Control Riser section. NOTE: For Mercury 4.5L & 6.2L (non-EC) engines see "Exhaust Riser Kits (Gas, Small Block, Emissions Control)" since the 4.5L & 6.2L (non-EC) engines use the same riser kits as the EC engines.
INTERMEDIATE ELBOW KIT
14801A 1 - Only required on sterndrive engines that have the exhaust going through the prop. Fits MCM V-8 (305, 350 & 377 cid) engines (0W309999 and below)
Install Kit Riser
GTIN: 745061113251
WEIGHT: 3.583 kg
Note: Always verify the compatibility of replacement parts with your specific engine model and serial number. For assistance, consult your Mercury Marine dealer or refer to the Mercury Parts Catalog.