BLA Number: 268398
3M™ Marine Adhesive Sealant 5200 is extremely strong and retains its strength above or below water line. Stays flexible too - allows for structural movement. Has excellent resistance to weathering and salt water.
Stress caused by shock, vibration, swelling or shrinking is effectively absorbed. Check the bonding and sealing jobs this product can handle for you fibreglass deck to fibreglass hull, wood to fibreglass, portholes and deck fittings, motors on fibreglass transoms, under mouldings, hull seams above and below water line. Centre board trunk joints. Between struts and planking. Stern joints. Deck housing, etc. Easy to apply with manual caulking gun. Won't sag or flow in vertical or horizontal seams.
Features
• Very high strength
• Watertight bonds
• Above/Below waterline use
• Adhesive Type Polyurethane
• Application Method Hand or pressure caulk
• Colour White
• Elongation >700%
• Full Cure 3mm per 5 day
• Hardness 68 Shore A
• Industries Construction, General Industrial, Marine, Specialty Vehicle, Transportation
• Physical Form Medium paste
• Product Form Cartridge
• Solids Weight Percent (Approximate) 97%
• Tack Free Time 12 Hour
GTIN: 051135065204
WEIGHT: 0.42 kg
Note: Always verify the compatibility of replacement parts with the distributor or by referencing your product manual. For assistance, consult your dealer.
3M™ Marine Adhesive Sealant 5200 is extremely strong and retains its strength above or below water line. Stays flexible too - allows for structural movement. Has excellent resistance to weathering and salt water.
Stress caused by shock, vibration, swelling or shrinking is effectively absorbed. Check the bonding and sealing jobs this product can handle for you fibreglass deck to fibreglass hull, wood to fibreglass, portholes and deck fittings, motors on fibreglass transoms, under mouldings, hull seams above and below water line. Centre board trunk joints. Between struts and planking. Stern joints. Deck housing, etc. Easy to apply with manual caulking gun. Won't sag or flow in vertical or horizontal seams.
Features
• Very high strength
• Watertight bonds
• Above/Below waterline use
• Adhesive Type Polyurethane
• Application Method Hand or pressure caulk
• Colour White
• Elongation >700%
• Full Cure 3mm per 5 day
• Hardness 68 Shore A
• Industries Construction, General Industrial, Marine, Specialty Vehicle, Transportation
• Physical Form Medium paste
• Product Form Cartridge
• Solids Weight Percent (Approximate) 97%
• Tack Free Time 12 Hour
GTIN: 051135065204
WEIGHT: 0.42 kg
Note: Always verify the compatibility of replacement parts with the distributor or by referencing your product manual. For assistance, consult your dealer.
Alternative Products
These other products might interest you